DM-1321型玻璃异形磨边机适用于加工平板玻璃的异形周边和斜边。采用真空将玻璃吸附在吸盘上，配电机驱动转盘旋转或单独驱动盘上的一个独立卫星转盘旋转，使该机可加工回转直径700-2100mm或100-700mm的异形平板玻璃。转盘旋转速度可在工作时任意调整。本机利用气缸也可对简单形状异形玻璃进行半自动磨削。磨削周边时，可安装三个磨轮进行粗磨、精磨和抛光。磨削斜边时，安装碗形磨轮，将磨头向后倾斜，调节斜面角度，以端面加工切削。（凡购买本公司设备，则免费提供技术培训）
DM-1321 Glass abnormity edge grinding machine is applicable for processing abnormity edge and bevel edges of plate glass. It adsorbs the glass on the suction plate, installed with a electric machine driven rotary plate or independently driven plate with an independent satellite rotary plate on to enable the machine to process abnormity plate glass with a diameter of 700-2100mm or 100-700mm. The speed of retary plate can be adjusted during the working of the machine. The machine can implement semi-automatic grinding to simple shape abnormity glass with cylinder. Three grinding wheels can be installed when grinding edges for rough grinding, fine grinding and polishing. When grinding bevel edges, bowl-shaped grinding wheel is installed with the grinding head leaning back to grinding with end face. (Free technical training is provided if buying our equipments.)
主要技术参数
Main Technical Parameters
| 玻璃回转直径 Steady turning diameter of glass | 100-2100mm | 斜边磨轮（碗形） Bevel edge grinding wheel (bowel shape) | φ150(bowlshape) |
| 玻璃厚度 Glass thickness | 3-21mm | 磨边轮（优先选用）或φ175 Grinding wheel (priority given) or φ175 | φ100 φ150 or φ175 |
| 斜边角度 Angle of bevel edge | 0-150 | 磨斜边玻璃的回转直径 Steady turning diameter of glass bevel edge grinding | 400-2100mm |
| 转盘转速 Speed of rotary plate | 0-2.5r/min | 最大斜边宽度 Max width of bevel edge | 35mm |
| 卫星转盘转速 Speed of satellite rotary plate | 0-5r/min | 总功率 Total power | 3kw |